E-mail : overseas@hbhuayue.com

Home >> Products >> Fabric Conveyor Belt >> Anti-Tear Fabric Conveyor Belt

Anti-Tear Conveyor Belt

Share
Description

1. Applications of Anti-Tear Conveyor Belt, Bucket Conveyor Belt

Anti-tear conveyor belt (Tear resistance/Rip stop conveyor belt) is normally used for transporting heavy and sharp materials. The belt is used in industries of mines, ports, power, metallurgy, chemical industry, coal mine, etc. We place transverse, high tension breaker (steel wire mesh breaker/ nylon fabric breaker) as strengthened layers inside top/bottom cover of belt.

The belt has characteristics of excellent cutting and tearing resistant, high impact absorb design, high elongation weft textile cord gives good troughability.

2. Technical Flow of Anti-Tear Conveyor Belt for Sale

EP Nylon Conveyor Belt


3. Physical Properties of Rubber Cover (before aging), China Conveyor Belt

GradeTensile Strength/Mpa ≥Breaking Elongation/% ≥Abrasion Loss/mm3 ≤
H24450120
D18400100
L15350200

Note:

Grade H-used for transporting sharp, abrasive materials which can damage belts badly.

Grade D-used for transporting highly abrasive materials.

Grade L-used for transporting medium-abrasion materials.

After-aging properties of rubber cover(70℃, 7days):

Tensile strength and breaking elongation are both not lower than 75% of before-aging values.


4. Full-thickness Tensile Properties

a. Longitudinal tensile strength, not less than the below table. (N/mm)

Nominal belt type160200250315400500630
800100012501600200025003150


b. Full thickness, longitudinal elongation at reference force, not more than 4%.

c. Ply adhesion:

ItemPly to plyRubber cover to ply
Rubber cover thickness ≤1.5mmRubber cover thickness >1.5mm
All samples average value/ (N/mm) ≥4.53.23.5
All samples min peak value/ (N/mm) ≥3.92.42.9
Note: All samples max peak value is not more than 20N/mm.

d. Straightness not more than 25mm

5. FAQs

Q1. Are you a manufacturer?

A. Yes, We are. We have been producing and selling conveyor belts since 1982.

Q2. Can you produce belts with my own brand?

A. Yes, we can.

Q3. What about the lead time?

A. 1) 5~7 days for sample (free sample)

    2) 15~30 days according to order quantity.

Q4. How do you ensure product quality?

A. 1) We have a R&D center of an independent design and developing capacity

    2) We an independent testing laboratory with full-property testing capacity of conveyor belt. We can test various materials, rubber, fabric, semi-finished product and finished product.

Products News What is the Belt Refurbishment Process?

Skype

Whatsapp

E-mail