Industrial Conveyor Belt Manufacturer's selection of materials has always been one of the most worthwhile aspects of heat-resistant conveyor belt manufacturers during the production process, while the Heat-resistant Conveyor Belt Factory needs to be considered when selecting materials, materials and heat-resistant conveyor belts. Whether the characteristics of the temperature, surface structure, and viscosity of the materials carried are consistent. For example, if the user uses a heat-resistant conveyor belt to transport large materials such as sintered ore and coke, and the contact area between the material and the conveyor belt is small, the heat-resistant conveyor belt manufacturer needs to make the heat-resistant temperature of the conveyor belt reach 60%. Between eighty degrees Celsius. If the material transported by the user is a material with a small viscosity such as cement powder, it is necessary to ensure that the difference between the temperature of the material and the surface temperature of the heat-resistant conveyor belt is not too large.
With the rapid rise and development of various industries, the number of Acid-alkali Resistant Conveyor Belts has been rising, and the number of people using them has increased, and the resulting problems are diverse and resistant. Among the failures of acid-base conveyor belts, the most common and common problem is the conveyor belt deviation. At this time, it is necessary to remedy the timing of the acid-base conveyor belt. There are two reasons for the deviation of the acid and alkali resistant conveyor belt. The first is that the axis of the head drive roller or the tail reversing drum is not perpendicular to the center line of the conveyor, and the second one is the error of the outer surface of the drum. If the diameter of the adhesive or the degree of wear is severely uneven, the diameter of the acid and alkali conveyor belt will be easily biased in a certain direction.