The conveyor belt has different overlapping manners depending on the thickness of the belt body and the characteristics of the belt body itself. The Steel Cord Conveyor Belt Manufacturer believes there are several ways:
1. Hot-melt joint ring belt----This is a more traditional and cumbersome way of lap joint. Process flow: cutting, layering, and toothing, welding fixed joints, hot melt on the machine, this is also called tooth joint. The toothed joint is divided into a single toothed joint and a double-toothed joint, and the double tooth is generally suitable for a PVC conveyor belt. The PU conveyor belt itself is relatively thin. In order to achieve a more precise size, it is usually single-toothed, with small error, good stability, and high precision. The tooth connection is more suitable for the belt with a thin belt. (0.8-7.0mm can choose the tooth connection). The thickness of the belt body changes and the overlapping method is also different. A slightly thicker belt, such as a 7.0-13.5mm thick belt, requires a layered overlap.
Through the above process, the general joint is relatively firm and suitable for belts of various thicknesses and various textures.
Fire Resistant Conveyor Belt
2. Steel buckle lap joint---This lap joint method is relatively simple, easy to install, find, easy to disassemble and save time. Suitable for a wide range of thicknesses, the Fire Resistant Conveyor Belt, without the need for complicated installation tools.
3. Cold connection---Cold connection adopts belt layering method and glues the belt together. This method is simple and not durable and is rarely used. Because the joint position is the weakest part of the belt, it has not been treated by any process, and it is glued with glue. If the pulling force is high, the bridging method is often not taken.
For more information on the Cold Resistant Conveyor Belt, please follow our website.