E-mail : overseas@hbhuayue.com

Home >> About Us >> News

Does Conveyor Belts need Anti-Static?

Jun. 05, 2020

As a Steel Cord Conveyor Belt Factory, share with you. Anti-static is very important in many types of conveyor belts. To some extent, anti-static conveyor belts can also be attributed to a complicated technicality. Conveyor belts have anti-static properties, can it immediately jeopardize the adaptability of the conveyor belt to the natural environment, anti-static conveyor belts, anti-static conveyor belts are completely different in the workplace. Second, anti-static conveyor belts can even jeopardize the safety of the workplace. Generally, anti-static conveyor belts are used, and their safety factor is guaranteed to be high, which is not easy to affect the natural environment.

 Anti-Tear Conveyor Belt

 Anti-Tear Conveyor Belt

Static phenomenon will occur in our daily life, everyone's hair, clothes and pants, these. It may cause static induction in dry conditions. But in addition, static induction has the risk of "fuses" in some areas, such as the natural environment of industrial production with higher temperatures, or the raw materials of a small flame cannot be considered. These also reflect the necessity of anti-static conveyor belts in such places.

1. Conveyor Belts should be kept clean and tidy during transportation and storage to prevent natural light exposure, rain and snow weather, avoid contact with acids, alkalis, raw oil, solvents and other chemicals that damage the quality of elastomer materials, and the distance between them is hot mechanical equipment is one meter away.

2. The relationship between the diameter of the transmission drum of the transport aircraft and the cloth layer of the conveyor belt, the public service facilities of the gear transmission roller and the redirecting drum, and the provision of the buffer angle of the buffer roller of the cache file should be based on the design plan requirements of the belt conveyor. Effective selection.

3. During storage, the temperature in the warehouse should be maintained between -15℃ and +40℃, and the air humidity should be maintained between 50-80%. Conveyor belts in storage must be stacked into rolls and placed without expansion joints. The storage time should be rotated once a quarter.

4. The operating speed of the conveyor belt should not exceed 0.5 meters per second. The raw materials with large block size and large abrasion and the fixed application will not change the pear-shaped feeding machinery and equipment. As far as possible, low-speed gears should be used. When the required speed of the adhesive tape is exceeded, the service life of the adhesive tape will be damaged.

5. In order to alleviate the destructiveness and damage of the raw material to the adhesive tape, the orientation of the feeder should follow the operation direction of the adhesive tape; the undulation of the raw material falling into the adhesive tape sand nest should be reduced as much as possible; the mouth of the feeder should bypass the drum or cache Above the file buffer buffer roller; the tape receiving section should reduce the buffer file buffer roller interval and adopt cache file precautions.

Our company also has Anti-Tear Conveyor Belt for sale, please contact us.


Hot Products

is the major factory of fabric conveyor belt in China

EP Nylon Conveyor Belt
EP Nylon Conveyor Belt
Steel Cord Conveyor Belt General Use
Steel Cord Conveyor Belt General Use
Heat Resistant Fabric Conveyor Belt
Heat Resistant Fabric Conveyor Belt
Fire Resistant Fabric Conveyor Belt
Fire Resistant Fabric Conveyor Belt

Skype

Whatsapp

E-mail