E-mail : overseas@hbhuayue.com

Home >> About Us >> News

How to Deal With Conveyor Belts Slip?

Mar. 17, 2020

As an Industrial Conveyor Belt Manufacturer, share with you.

Anti-Tear Conveyor Belt

Anti-Tear Conveyor Belt

1. The initial support force is very small. Insufficient support at the Conveyor Belts exit rollers caused the conveyor belt to slip. Such things generally occur at startup, and the processing method is to adjust the tensioning equipment and increase the initial support force.

2. The sliding friction between the transmission system drum and the conveyor belt is insufficient to cause slipping. It does not have to be the reason that most of them are water on the conveyor belt or wet and cold in the natural environment. The solution is to add some turpentine to the roller. But pay attention that you can't add medicine by hand, and use blower silencer machine equipment to blow in to prevent accidents.

3. The rolling bearing at the end of the roller does not rotate or the left and right buffer rollers (support point conveyor belt and net weight of the raw material) are too damaged. The reason for the damage is that the tail of the aircraft sinks too much, without immediate repair and replacement of components that have been damaged or not rotating, which increases the frictional resistance-resulting in slippage.

4, too fast starting rate can also produce slip. Start at a slow speed. If the squirrel cage motor is used, it can be restarted after jogging twice, and it can also effectively get rid of slippage.

5. The load of the conveyor belt is too large, and the working capacity of the motor will slip. At this time, the advantage of slipping is that it has maintenance effect on the motor. Otherwise, the motor will be damaged for a long time. But for the operation, it is a slip safety accident. To get rid of the slippery condition of the conveyor belt, to find slippery reasons, you can use effective treatment countermeasures.

6. The reason for the insufficient frictional resistance on the roller surface is as follows: the plastic coating on the roller surface is damaged, the belt body is too wet or stained with grease, and the surface of the belt body is stained with raw materials (easy to be water-soluble); treatment: at the driver roller In addition to redirecting the drum, lifting the surface of the drive belt and driver drum; changing the method of wrapping the driver drum, etc. Polyester conveyor belt is suitable for transporting non-corrosive non-corrosive small pieces, granular, powdery various raw materials, such as coal (carbon), coke, sand, concrete, and other bulk materials (materials) or finished products at room temperature. It can reduce-low transportation costs, and maintain rapid, long-span, long-distance transportation. Polyester conveyor belt has thin body, high strength-high strength, impact resistance, strong groove formation, large beam bonding force, excellent flexural flexibility-different time, and long application time. It is suitable for medium and long distances and higher load capacity Raw materials are transported under the fast speed standard, and are used in mining, coal plants, chemical plants, metallurgical industries, engineering construction, seaports and other units.

Our company's Anti-Tear Conveyor Belt is still on sale. Welcome to consult.


Hot Products

is the major factory of fabric conveyor belt in China

EP Nylon Conveyor Belt
EP Nylon Conveyor Belt
Steel Cord Conveyor Belt General Use
Steel Cord Conveyor Belt General Use
Heat Resistant Fabric Conveyor Belt
Heat Resistant Fabric Conveyor Belt
Fire Resistant Fabric Conveyor Belt
Fire Resistant Fabric Conveyor Belt

Skype

Whatsapp

E-mail