Fire Resistant Steel Cord Beltplays an important role in the production of many enterprises, and even the key links in production. In the process of using the conveyor belt, it is inevitable that there will be wear and other conditions, which will affect the normal operation of the enterprise. From this point of view, the maintenance work of the conveyor belt is very important. As a Fire Resistant Steel Cord Belt Factory, Huayue will tell you about the fireproof wire rope conveyor belt. How to carry out maintenance.
1. The conveyor belt should be kept clean during transportation and storage, avoid direct sunlight or rain and snow immersion, and prevent contact with organic solvents such as acid and alkali oil, and 1 meter away from the heating device.
2. The temperature in the warehouse should be kept between -18-40 degrees during storage, and the relative humidity should be kept between 50-80%.
3. During storage, the product must be placed in rolls, not folded, and should be flipped once every quarter.
4. Conveyor belts of different types and specifications should not be used together, and the joints are preferably glued.
5. The type, structure and number of layers of the conveyor belt should be reasonably selected according to the conditions of use.
6. The running speed of the conveyor belt should not exceed 2.5 m/s. The material with large block size and large wear should use the fixed force type unloading device, and the low speed should be used as much as possible.
7. The relationship between the diameter of the transmission drum of the conveyor and the belt layer of the conveyor belt, the matching of the transmission drum, the reversing drum and the bracket angle should be reasonably selected according to the design regulations of the conveyor.
8. The feeding direction should conform to the running direction of the tape. In order to reduce the impact on the tape when the material falls, the chute should be used to reduce the falling distance of the material; the receiving section of the tape should shorten the spacing of the idler and use the buffer roller to prevent leakage. Material, the belt side should use a soft and moderate baffle plate, so as to avoid the baffle plate is too hard, scratching the belt surface of the conveyor belt.