E-mail : overseas@hbhuayue.com

Home >> About Us >> News

Where is the Main Wear Location of Conveyor Belts?

Jul. 28, 2020

Conveyor Belts will cause friction with buffer rollers, belt conveyors, raw material ports, etc. during application. The greater the sliding friction, the greater the damage to the conveyor belt. In order to reduce the damage of the conveyor belt, it is necessary to understand the key friction position of the conveyor belt. The Fabric Conveyor Belt Manufacturer below details the key friction positions of the conveyor belt.

Conveyor Belts

Conveyor Belts

1. The friction between the sound card frame and the conveyor belt will cause the conveyor belt to deviate due to the defects caused by the manufacture, installation, and application of the belt conveyor. When the direction deviates too much, the conveyor belt and the roller The brackets and sound card racks are touched and the side glue is damaged or even the conveyor belt is reversed.

2. The friction between the partition of the guide trough and the conveyor belt, and the damage of the partition to the conveyor belt is a unique damage. If the design method of the partition is improved and maintenance is paid attention to, this type of damage can basically be avoided.

3. The friction between the buffer roller and the conveyor belt, the lower covering rubber of the conveyor belt will also suffer from the friction of the self-aligning buffer roller and its protruding trough-shaped buffer roller, and in the transition section from the trough-shaped buffer roller to the drum The bent protrusions of the belt conveyor are all caused by damage.

4. The friction between the mining machine and the conveyor belt and the damage caused by the mining machine to the conveyor belt are generally symmetrical. However, when a harder thick steel plate is used as a cleaning plate, if the operation method is not good, the waste will be removed. The vulcanized rubber outside is drilled out, and when the dirt between the tip of the miner and the conveyor belt enters, it will continue to draw deep scars on the overall length of the conveyor belt.

The above is the location where the conveyor belt is often damaged in the application. In the installation and application, we must try to avoid friction at this location to increase the service life of the conveyor belt. Conveyor belt non-destructive testing and diagnosis technology has already been perfect in the production and processing of paper pulp products. The conveyor belt itself has many advantages and should receive a lot of attention in the future. Traditional inspection methods, machinery and equipment have a high degree of difficulty in actual operation. Some instruments and equipment cannot be used in industrial production and become a driving method to improve the overall quality of the company. As a reasonable inspection method, more and more Used in the production and processing of paper pulp products.

Our company also has Heat Resistant Steel Cord Conveyor Belt on sale, welcome to contact us.


Hot Products

is the major factory of fabric conveyor belt in China

EP Nylon Conveyor Belt
EP Nylon Conveyor Belt
Heat Resistant Fabric Conveyor Belt
Heat Resistant Fabric Conveyor Belt
Fire Resistant Fabric Conveyor Belt
Fire Resistant Fabric Conveyor Belt
Steel Cord Conveyor Belt General Use
Steel Cord Conveyor Belt General Use

Skype

Whatsapp

E-mail