E-mail : overseas@hbhuayue.com

Home >> About Us >> News

What should I Pay Attention to When Nylon Conveyor Belt is in Operation?

Jun. 20, 2020

As a Nylon Conveyor Belt Factory, share with you. Nylon conveyor belt is a kind of conveyor belt, which is very suitable for long-distance transportation. And nylon conveyor belt has the characteristics of thin belt, high strength, high impact resistance, good groove formation, and large virtual beam adhesion. It is widely used in mining, coal plants, chemical plants, metallurgical industry, engineering construction, seaports, etc. unit. But what problems should Nylon Conveyor Belt pay attention to in its operation?

EP Nylon Conveyor Belt

EP Nylon Conveyor Belt

1. When the temperature sensor or temperature sensor drops, or when the belt conveyor is running and the vibration and noise are found abnormal; the nylon conveyor belt should be shut down immediately for maintenance.

2. When some buffer rollers are not properly installed for long-term direction deviation, even if they are not applied, the digging working surface will slowly decrease, and finally they cannot be put into use, or even shorter than the working hours of the continuous running nylon conveyor belt. Destruction within time. Therefore, the nylon conveyor belt cannot be opened and stopped too often, otherwise it will endanger the service life of the goods.

3. When the nylon conveyor belt is terminated, the raw materials of the conveyor belt should be immediately unloaded. At this time, restarting immediately will cause the load of the commodity to be too heavy and bear excessive shock; in addition, the conveyor belt will be damaged if it is opened and stopped too often. Take on the parts with weak impact work ability, and cause the destruction of all belt conveyors.

4. After shutdown, the motor cannot be restarted until the motor is completely terminated.

5. Check the electric roller and disconnect the switch power supply.

6. When the nylon conveyor belt is in operation, do not wash objects, swim or drain livestock, to prevent safety accidents when the motor is powered.

Nylon conveyor belt, in which the white canvas is polyester polyester canvas. Polyester (NN) conveyor belt has the characteristics of thin belt body, high super strength, impact resistance, good groove formation, large virtual beam adhesion, excellent flexibility and long service life, suitable for medium and long distances, high load capacity, Transportation of raw materials under high speed standards is generally used in mining, coal plants, chemical plants, metallurgical industry, engineering construction, seaports and other units. 

Nylon conveyor belts are generally used in mining, coal plants, chemical plants, metallurgical industry, engineering construction, seaports and other units. Nylon conveyor belt is suitable for transporting non-corrosive non-corroding small pieces, granules, powders, various raw materials such as coal, coke, sand, concrete and other bulk materials (materials) or finished goods at normal temperature. Various raw materials such as small pieces, granules, powders, etc. with apparent density of 6.5~2.5t/m3 can also be transported in bulk.

Our company also has EP Nylon Conveyor Belt for sale, please contact us.


Hot Products

is the major factory of fabric conveyor belt in China

EP Nylon Rubber Conveyor Belt
EP Nylon Rubber Conveyor Belt
Heat Resistant Fabric Conveyor Belt
Heat Resistant Fabric Conveyor Belt
Fire Resistant Fabric Conveyor Belt
Fire Resistant Fabric Conveyor Belt
Steel Cord Conveyor Belt General Use
Steel Cord Conveyor Belt General Use

Skype

Whatsapp

E-mail