As a Rubber Belt Manufacturer, share with you.
Rubber Conveyor Belts
1. The connection of the conveyor belt is broken. If this kind of situation occurs in the conveyor belt that has just been dismantled and replaced, the general situation is that the conveyor belt that has been hot-connected soon has not been completely fixed, so the drum should be tensioned. It is recommended that the hot-connected conveyor belt should not be adjusted as much as possible in the short term. Tight, extremely high loads will cause the connection to break. The solution is to ask the conveyor belt company to heat up again.
2. The direction of the conveyor belt is off track. First, check whether the drums are at the same level, and secondly, check whether the conveyor belt is connected with wood or not. If the direction deviation of the transmission belt is not serious, it is possible to avoid the deviation of the conveyor belt direction by welding the stoppers on both sides of the sound card rack. If the direction deviation of the conveyor belt is serious, the conveyor belt itself is bent, and the conveyor belt enterprise can be specified to be heavy. Install a new conveyor belt conveyor belt maintenance.
3. Conveyor belt runs off. This kind of situation may be that the drum is too old and the friction resistance is too low. It is proposed to dismantle and replace the drum or carry out plastic coating on the drum. Jin Ao showed the roller coating service item, which fixed the conveyor belt to the drum. The surface layer not only improves the friction resistance, maintains the drum and the conveyor belt, increases the service life of the drum and the conveyor belt, but also ensures the stability of the production and even improves the productivity.
4. The surface of the conveyor belt is damaged too much. It is recommended to remove and replace the new conveyor belt. Before removing the conveyor belt, it is recommended to loosen the drum and then remove the conveyor belt. It is not necessary to force the conveyor belt to be lifted to reduce the probability of equipment damage.
If the conveyor belt is still normal without any problems, please loosen the drum before the holiday to avoid long-term tension and deformation of the conveyor belt. In addition, it is recommended to carry out the maintenance of unsalted butter on the drum to prevent long-term corrosion. Hazard next year's application.
Our company also has Rubber Conveyor Belts on sale, welcome to contact us.