As a Rubber Conveyor Belts Manufacturer, share with you. With the
popularization of conveyor belts in industrial production, various types,
excellent performance, light weight, intelligence, and long life are good
aspects that manufacturers care about. In industrial production, the proper
application of conveyor belts seems to be especially critical. The application
of conveyor belts should pay attention to the following matters:
1. Prevent the buffer roller from being covered by the raw materials, causing insensitive rotation, avoiding the overflow material caught between the drum and the tape, pay attention to the moistening of part of the conveyor belt theme activities, but not oily conveyor belt;
2. Avoid starting of conveyor belt load;
3. The deviation of the direction of the conveyor belt should be corrected immediately and effectively;
4. When it is found that the conveyor belt is partially damaged, use artificial cotton fabric to repair it immediately to prevent expansion;
5. Prevent the conveyor belt from being obstructed by the sound card frame, support or small pieces of raw materials, and avoid scratching and tearing.
Rubber Conveyor Belts
What problems should be paid attention to when storing conveyor belts?
1. The conveyor belt should be kept clean and tidy during transportation and storage to prevent natural light exposure, rain and snow weather, and avoid contact with acids, alkalis, raw oil, solvents and other chemical substances that damage the quality of elastomer materials, and the distance The hot mechanical equipment is one meter away.
2. The relationship between the diameter of the transmission drum of the transportation aircraft and the cloth layer of the conveyor belt, the public service facilities of the gear transmission roller and the redirection drum, and the provision of the buffer angle of the buffer roller of the cache file should be based on the design plan requirements of the belt conveyor. Effective selection.
3. During storage, the temperature in the warehouse should be maintained between -15°C and +40°C, and the air humidity should be maintained between 50-80%. Conveyor belts in storage must be stacked into rolls and placed without expansion joints. The storage time should be rotated once a quarter.
4. The operating speed of the conveyor belt should not exceed 0.5 meters per second. The raw materials with large block size and large abrasion and the fixed application will not change the pear-shaped feeding machinery and equipment. As far as possible, low-speed gears should be used. When the required speed of the adhesive tape is exceeded, the service life of the adhesive tape will be damaged.
5. In order to alleviate the destructiveness and damage of the raw material to the adhesive tape, the orientation of the feeder should be in accordance with the operating direction of the adhesive tape; the fluctuation of the raw material falling into the adhesive tape sand nest should be reduced as much as possible; the feeder mouth should bypass the drum or cache Above the file buffer buffer roller; the tape receiving section should reduce the buffer file buffer roller interval and adopt cache file precautions.
Our company also has Rubber Conveyor Belts for sale, please contact us.