Sidewall Conveyor Belt is widely used in the material transportation industry. It has many advantages, such as large transportation volume, difficult material leakage, and non-slip, which are well received by customers. So what are the precautions in the use of the wave-shaped ribs during use? Fabric Conveyor Belt Manufacturer to explain to you.
Steep Angle Sidewall Conveyor Belt
1. It is strictly forbidden to use different Steep Angle Sidewall Conveyor Belts together.
2. The direction of the transported material and the speed at which the material falls are consistent with the direction and speed of the Sidewall Conveyor Belt.
3. The air machine is started to avoid the motor overload and the large dip angle Sidewall Conveyor Belt slipping. Before the machine is stopped, the materials are completely discharged.
4. Use the Steep Angle Sidewall Conveyor Belt to prevent folding and hard object phase pressure. Should be used and stored in a curl.
5. Steep Angle Sidewall Conveyor Belt tension should not be too large, should be used under the minimum tension.
7. In the use of Sidewall Conveyor Belt, the phenomenon of slipping or pulling may occur. The fault should be eliminated in time to adjust the tensioning system to keep the elastic device flexible.
8. Do not allow the Sidewall Conveyor Belt to run or snake running during transportation. It should be adjusted in time.