As a Nylon Conveyor Belt Factory, share with you.
EP Nylon Conveyor Belt
1. The connection of the conveyor belt is broken. If this kind of situation occurs in the conveyor belt that has just been dismantled, the general situation is that the conveyor belt that has been hot-connected soon has not been completely fixed, so the drum should be tensioned. It is recommended that the hot-connected conveyor belt should not be adjusted in the short term. Tight, extremely high load will cause the connection to break. As a solution, please contact the conveyor belt company again.
2. The direction of the conveyor belt is off track. Firstly, check whether the drums are at the same level, and secondly, check whether the conveyor belt is connected with wood or not. If the direction deviation of the transmission belt is not serious, it is possible to avoid the deviation of the conveyor belt direction by welding the barriers on both sides of the sound card rack. If the direction deviation of the conveyor belt is serious, the conveyor belt itself is bent, and the conveyor belt enterprise can be specified to be heavy. Install new conveyor belt and conveyor belt maintenance.
3. The conveyor belt is running off the track. This kind of situation may be that the drum is too old and the friction resistance is too low. It is proposed to dismantle and replace the drum or carry out plastic coating on the drum. Jin Ao showed the roller coating service item, which fixed the conveyor belt to the drum. The surface layer not only improves the friction resistance, maintains the drum and the conveyor belt, increases the service life of the drum and the conveyor belt, but also ensures the stability of production and even improves productivity.
4. The surface of the conveyor belt is damaged too much. It is recommended to remove and replace the new conveyor belt. Before removing the conveyor belt, it is recommended to loosen the drum and then remove the conveyor belt. It is not necessary to force the conveyor belt to be lifted to reduce the probability of equipment damage.
If the conveyor belt is still normal and there are no problems, please loosen the drum before the holiday to avoid long-term tension and deformation of the conveyor belt. In addition, it is recommended to carry out maintenance of unsalted butter on the drum to prevent long-term corrosion. Endanger the application next year.
Our company also has EP Nylon Conveyor Belt on sale, welcome to contact us.