As a Rubber Conveyor Belts Manufacturer, share with you.
During transportation and storage, the conveyor belt should be kept clean to prevent sun exposure or immersion in rain or snow, avoid contact with acids, alkalis, raw oil, solvents and other chemical substances, and keep it away from hot equipment one meter away.
Anti-Tear Conveyor Belt
During storage, the warehouse temperature should be maintained between 18-40℃, and the air humidity should be maintained between 50-80%.
During the storage period, the conveyor belt must be placed in rolls, not folded, and should be rolled quarterly during the storage period. Conveyor belts of different types, specifications, and superimposed layers are not suitable for connecting together, and it is best to use glue wiring for their connectors.
The type, structure, specifications and number of layers of the conveyor belt should be effectively adopted according to the application standards.
The operating speed of the conveyor belt is generally not suitable for more than 2.5 m/s. The raw materials with large lumpiness and abrasion and the application of fixed unmoving materials should be used as low as possible.
Conveyor belt is a common raw material communication and transmission equipment. When carrying out the operation adjustment of the conveyor belt, the actual operator of the conveyor belt must do a good job in the adjustment work. In addition, the conveyor belt staff must pay attention to the following problems in their work:
1. When the heat-resistant conveyor belt is in operation, it is necessary to pay attention to the load problem of the conveyor belt. All raw materials cannot exceed the larger carrying capacity of the conveyor belt. In addition, the transported raw materials must be handled within the same conveyor belt raw materials. If the raw material conveyed by the conveyor belt is overweight, it will cause the conveyor belt to rupture, and if the raw material conveyed by the conveyor belt exceeds, it will cause damage to the conveyor belt.
2. When all conveyor belts are in operation, the staff must not affect the operation of the conveyor belt. If an emergency occurs, the power switch can be used to turn off the operation of the conveyor belt, and then effective actual operations can be carried out. To
3. When the conveyor belt is in operation, the actual operation staff and the staff must cooperate with each other. No matter in which case, the actual operation should not be blindly followed. If the conveyor belt must be changed or prepared while it is running , The staff must be notified immediately, and then the staff must cooperate with each other.
The operation of the heat-resistant conveyor belt must be operated by the actual operating staff to grasp certain technical and actual operating standards. If the actual operating staff does not obtain the actual operating qualification, the actual operation cannot be carried out.
Our company also has Anti-Tear Conveyor Belt on sale, welcome to contact us.