As a Rubber Belt Manufacturer, share with you.
Rubber Conveyor Belts
1. Effective selection of conveyor belts: The selection of conveyor belts must take into account all aspects of the elements, mainly: the relevant rules of the belt conveyor to the system conveyor belt; the rules of the geomorphic natural environment and the safety level; the type and shape of the raw materials to be conveyed , Features, rules, large network bandwidth, supporting force and conveying capacity during work; minimum diameter of the drum; grooveability and lateral tortuous rigidity; load support point; interval between curve section and connection section; tightening method and stroke organization, Receiving point and material specification, and the operating cycle time of the conveyor belt; impact resistance and resilience level rules, joint specifications, etc.
2. Reduce the damage of the belt conveyor mechanism to the conveyor belt: each component of the belt conveyor is based on standardized machinery and equipment. When ordering, you must choose a professional manufacturer of products from the belt conveyor manufacturer, and have an excellent reputation in the production of belt conveyors. Only the only manufacturer can guarantee the precision and quality of each component. The installation of each component shall be implemented in accordance with the current specifications for the installation of conveying machinery and equipment and the technical specifications for engineering acceptance. Components that are very likely to cause damage to the conveyor belt (such as side skirts, scrapers, various miners, etc.) should be adjusted during installation to reduce damage, and pay more attention to inspections during operation.
3. The improvement of the structure of the feeding equipment: the daily mission of the feeding equipment is to ensure that the conveying raw materials are loaded on the belt conveyor. The service life of the conveyor belt is very much related to the structure of the feeding equipment. The design plan for the structure of the feeding equipment has the following rules: When loading raw materials on the belt conveyor, the speed and orientation of the raw materials should be close to the operating speed and orientation of the conveyor belt; the raw materials must be installed on the conveyor belt management center, and the raw materials are not allowed to be scattered. Falling out of the belt conveyor; when conveying bulk materials, minimize the impact of raw materials on the conveyor belt, and minimize the feeding aspect ratio; the feeding amount is adjustable, and maintains an excellent basis for work ability; maintain continuation Feeding to ensure that the material flow on the belt conveyor continues.
Our company also has Rubber Conveyor Belts on sale, welcome to contact us.