As a Nylon Conveyor Belt Factory, share with you.
1. Local rubber vulcanization method
Use a small vulcanizer to vulcanize the local damage. Due to the limitation of the size of the vulcanizer, the repair speed is only about 0.5m/h. This method is not suitable for long-distance repairs.
2. Rubber patch method
The rubber patching method using German technology has the big advantage of fast repairing. After polishing and cleaning the area to be patched, adhesive glue is applied, the rubber-plastic conveyor belt is sold directly, and the rubber is applied, and it can be turned on.
EP Nylon Conveyor Belt
The disadvantage is: usually after 60-90d of operation, the rubber will fall off. The bigger problem is that if the endless conveyor belt is running in a humid environment, water vapor will accumulate in the gaps on the bonding surface and rust the steel rope. The wire rope will rust over time. It even caused a sudden break of the entire conveyor belt. In addition, this repair method is also expensive.
3. Spraying technology repair
Repairing conveyor belts with spraying technology is a new type of solvent-free and pollution-free green construction technology. The supply of rubber and plastic conveyor belts is also very easy to understand. It is to use high pressure to spray paint on the worn surface of the conveyor belt to form wear resistance. Layer to achieve good wear resistance. This conveyor belt repair technology has many advantages, such as fast curing and no sagging; the construction thickness range is very large; it has tensile strength, elongation, flexibility, wear resistance, aging resistance, Excellent performance such as corrosion resistance; convenient construction, etc.
But there are still some areas that need improvement, that is, spray repair requires a special equipment box, and the method of external repair is used, which is difficult to coordinate. However, this repair method is sufficient to deal with the local wear of the conveyor belt.
Our company also has EP Nylon Conveyor Belt on sale, welcome to contact us.