As a Solid Woven Conveyor Belt Supplier, let us explain why conveyor belt joints are easy to crack.The strength of the joint of the conveyor belt is lower than the normal strength. Since the strength of the joint is relatively low, if the bonding method is not correct, the strength of the joint will be lower, such as when the knife is opened, the next layer of cloth is damaged, the length of the overlap is insufficient, the grinding is excessive, the number of steps is insufficient, and the joint is glued. The rubber used has poor performance or has failed from sulfur, and the strength of the joint portion will be greatly reduced. When used, the joint portion is likely to be broken. In addition, if the conveyor belt does not use the sealing glue, or the direction of the glue joint is wrong, the joint portion is prone to cracking.
Our company offers the Sidewall Conveyor Belt. Welcome to contact us.